Ford L9513 Headlight Bulb Size

The Ford L9513 headlight bulb sizes include H6024, 9007, and H4651 for high beam applications, along with H4656 for low beam configurations, representing the unique bulb specifications for this model. A replacement chart documents vehicle production data spanning 1996 to 1998, detailing the corresponding bulb size requirements across those years.

The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.

High Beam Headlight

If US Type and EU Type show the same value, a direct cross-reference for this bulb is not available or the data is insufficient.

Years	US Type	EU Type	Shop
1996-1998	H6024 (With 2 Round Headlamps)	H6024	Check Price
	H4651 (With 4 Rectangular Headlamps)	H4651	Check Price
	9007 (With Composite Headlamps)	HB5	Check Price

Low Beam Headlight

If US Type and EU Type show the same value, a direct cross-reference for this bulb is not available or the data is insufficient.

Years	US Type	EU Type	Shop
1996-1998	H6024 (With 2 Round Headlamps)	H6024	Check Price
	H4656 (With 4 Rectangular Headlamps)	H4656	Check Price
	9007 (With Composite Headlamps)	HB5	Check Price

Bulb Specifications

Description	Type	Shop
ANSI standard (US & Canada). 7-inch round sealed beam unit. Not a replaceable bulb — the entire unit is replaced. 12V.	H6024	Check Price
ANSI standard (US & Canada). 4x6-inch rectangular sealed beam unit. Not a replaceable bulb — the entire unit is replaced. 12V.	H4651	Check Price
ANSI standard (US & Canada). Dual-filament halogen bulb with PX29t base. 12V, 65W/55W.	9007	Check Price
ANSI standard (US & Canada). 4x6-inch rectangular sealed beam unit. Not a replaceable bulb — the entire unit is replaced. 12V.	H4656	Check Price

Other Locations

Additional Notes

The Ford L9513 (1996-1998) accommodates three distinct headlamp configurations: two round headlamps, composite headlamps, and four rectangular headlamps. Each configuration requires a different bulb type for both high and low beam functions, making correct identification of the headlamp system essential before sourcing a replacement.
The H6024 is a 7-inch round sealed beam unit operating at 12V and conforming to ANSI standards applicable in the US and Canada. It serves as both the high beam and low beam bulb in the two round headlamp configuration, meaning the entire unit is replaced rather than an internal filament or capsule.
The 9007 is a dual-filament halogen bulb with a PX29t base, rated at 12V with 65W on high beam and 55W on low beam. It is used in the composite headlamp configuration for both high and low beam functions across all three model years covered by these specifications.
The H4651 and H4656 are both 4x6-inch rectangular sealed beam units operating at 12V under ANSI standards. In the four rectangular headlamp configuration, the H4651 is designated for high beam use and the H4656 for low beam use. These are not interchangeable with each other despite sharing the same physical format.
Because the H6024, H4651, and H4656 are sealed beam units, the entire housing assembly constitutes the replaceable component. This contrasts with the 9007, where only the halogen capsule itself is replaced within a retained housing.
The 9007 bulb's dual-filament design allows a single bulb to handle both high and low beam operation within one composite housing. Its PX29t base is a keyed connector that prevents incorrect orientation during installation.
The bulb specifications for the Ford L9513 remain consistent across the 1996-1998 model years, with no variation in bulb type by year within any given headlamp configuration.
All four bulb types referenced in these specifications, H6024, 9007, H4651, and H4656, conform to ANSI standards recognized in both the United States and Canada, indicating standardized performance and fitment criteria across those markets.