Terex Advance Mixer high beam and low beam headlight bulbs both use the H6054 size. The replacement chart covers vehicle production spanning 2007 to 2014.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The H6054 is an ANSI-standardized 5x7-inch rectangular sealed beam unit rated at 12 volts, used across both the high beam and low beam headlight positions on the Terex Advance Mixer for model years 2007-2014, with the exception of 2012.
The H6054 sealed beam format is a self-contained unit in which the lens, reflector, and filament are fused into a single assembly. When the filament fails, the entire unit is replaced rather than an internal bulb.
The H6054 designation falls under ANSI standardization recognized in both the United States and Canada, meaning the unit conforms to a fixed physical and electrical specification shared across many vehicle and equipment manufacturers.
Because the Terex Advance Mixer uses the same H6054 unit for both high beam and low beam functions, the headlight assembly operates as a dual-function sealed beam rather than relying on separate housings or separate bulb types for each beam mode.
The 5x7-inch rectangular form factor of the H6054 is a standardized size, which means physically compatible sealed beam units from multiple manufacturers can fit the same housing, provided they carry the H6054 designation and meet the 12-volt rating.
Although the H6054 form factor is shared among many applications, substituting a visually similar sealed beam of a different designation risks a mismatch in filament position or wattage, which affects beam pattern and electrical compatibility.