Plymouth Fury I Map Light Bulb Size

The Plymouth Fury I map light requires bulb sizes 562, 1895, and 90 depending on the specific vehicle configuration. Available data for the bulb sizes covers the range from 1968 to 1974.

The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.

Bulb Size by Year Range

Years	Bulb Size
1974	562
1972	562
1971	1895
1968-1970	90

Bulb Specifications

Description	Bulb Size
ANSI standard (US & Canada). Festoon bulb, 44mm length, end-cap contacts. 12V, 12W.	562
ANSI standard (US & Canada). Miniature wedge bulb (T5). 12V, 0.9W.	1895
ANSI standard (US & Canada). Single-filament bulb with BA15s bayonet base. 12V, 13W.	90

Other Locations

Additional Notes

The Plymouth Fury I map light specifications cover model years 1968 through 1974 and reference three distinct bulb types across that span: the 562, the 1895, and the 90.
The 90 bulb is the most frequently specified type in these records, appearing across the 1968-1970 model years. It is a single-filament bulb with a BA15s bayonet base, rated at 12V and 13W.
The BA15s bayonet base on the 90 bulb features a single contact pin, which is a defining fitment characteristic. Substituting a dual-pin BA15d base bulb in its place would result in an incompatible fit.
The 562 is a festoon-type bulb with a 44mm length and end-cap contacts, rated at 12V and 12W. It is specified for the Plymouth Fury I in the 1972 and 1974 model years.
Festoon bulbs make electrical contact through metal caps at each end rather than through a base pin or wedge. The 44mm length of the 562 is a critical fitment factor, as festoon holders are sized to match a specific length.
The 1895 is a T5 miniature wedge bulb rated at 12V and 0.9W, specified solely for the 1971 model year. Its wattage is substantially lower than the other two bulb types in these specifications.
The wedge base of the 1895 relies on the bulb's glass envelope and wire leads to make contact with the socket, with no separate base pin or cap. This construction is not interchangeable with the bayonet or festoon socket types used in other Fury I model years.
All three bulb types carry ANSI standard designations applicable in both the United States and Canada, indicating conformance to a shared North American classification system.
The three bulb types represent three mechanically distinct socket interfaces: the bayonet base of the 90, the end-cap festoon mount of the 562, and the wedge base of the 1895. None of these are cross-compatible with one another.
The voltage rating of 12V is consistent across all three bulb types in these specifications, reflecting the standard 12-volt electrical system used in passenger vehicles of this era.