Nissan Rogue Glove Box Bulb Size

The Nissan Rogue glove box light requires 158 and 74 bulb sizes for the interior compartment. Available information covers the time period from 2008 through 2023.

The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.

Bulb Size by Year Range

If US Type and EU Type show the same value, a direct cross-reference for this bulb is not available or the data is insufficient.

Years	US Type	EU Type	Shop
2023	158	158	Check Price
2019-2020	74	W1.2W	Check Price
2008-2013	158	158	Check Price

Bulb Specifications

Description	Type	Shop
ANSI standard (US & Canada). Miniature wedge bulb (T10). 12V, 3W.	158	Check Price
ANSI standard (US & Canada). Miniature wedge bulb (T5). 12V, 1.4W.	74	Check Price
ECE standard (Europe & worldwide). Miniature wedge bulb (T5) with W2x4.6d base. 12V, 1.2W.	W1.2W	Check Price

Other Locations

Additional Notes

The Nissan Rogue glove box uses two distinct bulb sizes across its model years: the 158 and the 74, both of which conform to ANSI standards recognized in the United States and Canada.
The 158 bulb is a T10 miniature wedge type rated at 12 volts and 3 watts, while the 74 bulb is a T5 miniature wedge type rated at 12 volts and 1.4 watts. The T10 and T5 designations refer to the width of the bulb envelope in units of one-eighth of an inch, making these two bulbs physically incompatible with each other's sockets.
The 158 (T10) bulb is specified for the Nissan Rogue across 2008-2013 and again in 2023, representing the majority of model years listed in the specifications.
The 74 (T5) bulb applies to the 2019-2020 Rogue glove box, and its lower wattage of 1.4W reflects the smaller physical format of the T5 wedge base compared to the T10.
The 158 and 74 bulbs share the same 12-volt operating voltage but differ in wattage and wedge base size, meaning one cannot serve as a direct substitute for the other despite the shared voltage rating.
The wedge base design on both bulb types means the electrical contacts are formed by the glass envelope itself rather than a separate metal base, a construction common in low-wattage automotive interior lighting applications.