The Mitsubishi Raider brake light requires bulb size 2458 or 3157 depending on the specific configuration of the vehicle. Data for the provided bulb sizes covers the range from 2006 to 2009.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The Mitsubishi Raider uses the 3157 bulb for its brake lights across the full 2006-2009 model range.
The 3157 is a dual-filament wedge bulb classified under the T25 form factor, operating at 12V with a wattage split of 27W for the high-intensity filament and 7W for the low-intensity filament. This dual-filament design allows a single bulb to serve both brake and tail light functions.
The 3157 conforms to ANSI standards applicable in the United States and Canada.
The center high mount stop light on the Raider uses the 921 bulb across the same 2006-2009 model range.
The 921 is a single-filament wedge bulb classified under the T15 form factor, operating at 12V and 16W.
The 921 also conforms to ANSI standards applicable in the United States and Canada.
The T25 and T15 designations refer to the outer width of the bulb base, with T25 being physically larger than T15. These two bulbs are not interchangeable with each other due to differences in size, filament count, and wattage.
The lower wattage of the 921 relative to the 3157 reflects its role as a dedicated stop light rather than a combined stop and tail light unit.