Land Rover Range Rover Evoque headlight bulbs utilize 9005 and D3S sizes across high beam, low beam, and standard headlight positions. The replacement chart covers 2012 to 2019 model years with corresponding bulb size specifications.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
ECE standard (Europe & worldwide). Mercury-free HID (xenon) discharge bulb with PK32d-5 base and integral ignitor, for projector-type housings. 42V, 35W.
The 9005 is an ANSI-standard single-filament halogen bulb rated at 12V and 65W, fitted with a P20d base. It serves both high beam and low beam positions in the Land Rover Range Rover Evoque across the 2012-2019 model years when the vehicle is equipped with halogen capsule headlamps.
The D3S is an ECE-standard, mercury-free HID xenon discharge bulb rated at 42V and 35W, using a PK32d-5 base with an integral ignitor. It is specified for projector-type housings and appears in both high beam and low beam positions on 2012-2019 models equipped with HID headlamps.
The two headlight systems, halogen capsule and HID, are mutually exclusive on any given vehicle. Each model year from 2012 through 2019 carries either the 9005 or the D3S depending on which headlamp system was installed at the factory.
Because the 9005 operates on a 12V automotive circuit and the D3S requires 42V supplied by a dedicated ballast, the two bulb types are not interchangeable. Substituting one for the other is not electrically or mechanically compatible.
The D3S integral ignitor is a built-in component of the bulb itself rather than a separate part of the vehicle's wiring harness. This distinguishes it from older HID formats where the ignitor was housed externally.
The 9005 bulb is also listed under the Left Headlight and Right Headlight sub-parts for the 2018-2019 model years, specifically noted as halogen, indicating its use in those discrete headlamp assemblies as well.
The P20d base of the 9005 and the PK32d-5 base of the D3S are physically distinct connector types, which reinforces that no cross-fitment between the halogen and HID variants is possible regardless of voltage considerations.
The 9005 bulb, at 65W, draws notably more wattage than the 35W D3S, though the higher luminous output typically associated with HID technology means the lower-wattage D3S generally produces greater light output in practice.