International 5070 front and rear side marker bulbs utilize 67 and 1895 bulb sizes for the front position, with 97 and 67 bulb sizes for the rear position. The replacement chart covers 1992 to 1997 vehicle production years with corresponding bulb size specifications.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The International 5070 uses three distinct bulb types across its front and rear side marker positions: the 67, 1895, and 97, all of which conform to ANSI standards recognized in both the United States and Canada.
The 67 bulb is the most frequently specified type in the International 5070's side marker data, appearing in four of the six front side marker years and two of the six rear side marker years.
The 67 bulb operates at 12V and 8W, uses a BA15s single-contact bayonet base, and is classified as a lower-wattage variant of the 1156 bulb family.
The 97 bulb shares the same BA15s bayonet base as the 67 but operates at a higher wattage of 13W at 12V, making it a distinct variant within the 1156 family rather than a direct substitute for the 67.
The 1895 is a T5 miniature wedge bulb rated at 12V and 0.9W, a significantly lower output than either the 67 or 97, and it uses a wedge base rather than a bayonet mount.
Because the 67 and 97 share a BA15s bayonet base, their physical fit may appear similar, but their wattage difference means they are not interchangeable without affecting circuit load and light output.
The 1895 wedge base is mechanically incompatible with the BA15s bayonet sockets used by the 67 and 97, so no cross-substitution between the 1895 and the other two types is possible.
On the International 5070, the front side marker position used the 1895 in 1993 and 1995, while all other years in the 1992-1997 range used the 67, indicating that the same physical position did not carry a single consistent bulb type across the production span.
The rear side marker position transitioned from the 67 in 1992-1993 to the 97 in 1994-1997, representing a shift to a higher-wattage bulb in that location for the later portion of the covered years.
Technicians sourcing replacements for the International 5070 side markers must reference the specific model year, as the front and rear positions each contain year-dependent variations that involve both different bulb types and different base configurations.