Hyundai Santa Fe Sport Brake Bulb Size

The Hyundai Santa Fe Sport brake light uses 2357 and 2057 bulb sizes according to the provided technical data. Information for the specified components covers the range from 2013 to 2018.

The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.

Bulb Size by Year Range

Years	Bulb Size
2017-2018	2357
2013-2016	2057 (With Halogen Capsule Headlamps)

Bulb Specifications

Description	Bulb Size
ANSI standard (US & Canada). Dual-filament bulb with BAY15d bayonet base. Brighter variant of 1157. 12V, 26.9W/8W.	2357
ANSI standard (US & Canada). Dual-filament bulb with BAY15d bayonet base. Brighter variant of 1157. 12V, 26.9W/8W.	2057

Other Locations

Additional Notes

The 2357 bulb is an ANSI-standardized dual-filament type with a BAY15d bayonet base, rated at 12V with filaments drawing 26.9W and 8W respectively. The higher wattage filament serves the brake or turn function, while the lower wattage filament handles the running light function.
The 2057 shares the same ANSI dual-filament construction, BAY15d bayonet base, and 12V/26.9W/8W electrical ratings as the 2357, making the two bulbs electrically identical in their specifications.
Despite their identical electrical ratings and shared base type, the 2357 and 2057 are not confirmed as interchangeable within these specifications. The Hyundai Santa Fe Sport uses each type in distinct model year groupings, and substitution between them is not addressed in the provided data.
The 2017-2018 Santa Fe Sport uses the 2357 bulb for the brake light position, with no conditional fitment notes attached to either year.
The 2013-2016 Santa Fe Sport specifies the 2057 bulb exclusively under the condition of Halogen Capsule Headlamps, meaning this brake bulb size is tied to a specific headlamp configuration rather than applying universally across all trim or equipment variants of those model years.
The BAY15d bayonet base found on both the 2357 and 2057 is a two-pin offset base, where the two pins are positioned at different heights to prevent incorrect insertion orientation during installation.