Hino FE2618 front side marker bulbs measure 194 in size, while rear side marker bulbs measure 67, with each bulb type specified for its location on the vehicle. The replacement chart covers 1993 to 1995 production years and details bulb size specifications across this range.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The Hino FE2618 uses the 194 bulb for the front side marker position across the 1993-1995 model years.
The 194 is a T10 miniature wedge bulb rated at 12V and 3.78W, conforming to the ANSI standard used in the United States and Canada.
The T10 wedge base on the 194 bulb requires no locking pins or bayonet tabs, as the wedge-shaped base itself holds the bulb in place within the socket.
The rear side marker position on the 1993-1995 FE2618 takes the 67 bulb, a single-filament type with a BA15s bayonet base rated at 12V and 8W.
The BA15s bayonet base features a single locating pin, which distinguishes it from the dual-pin BA15d base and makes the two types non-interchangeable.
The 67 bulb is a lower-wattage variant of the 1156, sharing the same BA15s base but drawing 8W rather than the 26.88W of the 1156, so the two are not interchangeable despite the shared base type.
The front and rear side marker positions on the FE2618 use different bulb types, with the 194 wedge base at the front and the 67 bayonet base at the rear, making the two positions non-interchangeable with each other.
Both the 194 and the 67 conform to ANSI standards applicable in the United States and Canada, indicating standardized physical and electrical specifications for each type.