Hino FD2218 front side marker bulbs use 194 size while rear side marker bulbs use 67 size. The replacement chart covers 1993 to 1995 production years with corresponding bulb specifications.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The Hino FD2218 uses the 194 bulb for the front side marker position across the 1993-1995 model years.
The 194 is a T10 miniature wedge bulb rated at 12V and 3.78W, conforming to ANSI standards for the US and Canadian markets.
The T10 wedge base on the 194 bulb requires no locking mechanism, as the wedge-shaped base itself holds the bulb in place within the socket.
The rear side marker position on the 1993-1995 FD2218 uses the 67 bulb throughout the same model year span.
The 67 bulb operates at 12V and 8W, making it significantly higher in wattage than the 194 used at the front.
The 67 uses a BA15s bayonet base, which is a single-contact base that locks into its socket with a quarter-turn motion.
The 67 bulb is a single-filament design and is considered a lower wattage variant of the 1156, meaning the two share the same BA15s base type but differ in wattage output.
Because the 67 and 1156 share the same base, physical fitment in the socket is possible, but the wattage difference makes them non-interchangeable as direct replacements without accounting for circuit load.
Both the 194 and 67 conform to ANSI standards, indicating they meet standardized specifications for use in the US and Canadian markets.
The front and rear side marker positions on the FD2218 use different bulb types with different base designs, meaning the two positions are not interchangeable with each other.