The Edsel Villager front and rear turn signal bulbs both utilize a 1034 size bulb for proper operation. The replacement chart covers 1958 to 1960 model years with corresponding bulb size specifications.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The 1034 bulb is the sole turn signal bulb type listed for the Edsel Villager across all documented model years and positions.
The 1034 is a dual-filament bulb, meaning it serves two lighting functions within a single housing, typically combining a higher-wattage filament for active signaling with a lower-wattage filament for a secondary function such as running or parking light duty.
The bulb operates at 12 volts with a 21/5W output rating, reflecting the two filaments and their respective wattage draws.
The 1034 uses a BAY15d bayonet base, a two-pin offset base design in which the two pins are positioned at different heights to ensure correct polarity orientation during installation.
The 1034 is classified as an ANSI standard bulb recognized in both the United States and Canada.
The 1034 is a variant of the 1157 bulb. While the two share the same BAY15d base and dual-filament configuration, they are not identical and are not universally interchangeable, as wattage and voltage characteristics may differ between the two types.
The Edsel Villager (1958-1960) uses the same 1034 bulb specification for both the front and rear turn signal positions across all three model years, indicating a consistent electrical design throughout the vehicle's production run.