The Ducati PaulSmart 1000 LE uses 906 bulb size for both front and rear turn signal applications. The replacement chart covers 2005 to 2006 production years with corresponding bulb size specifications.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The 906 bulb is the sole bulb type specified for the Ducati PaulSmart 1000 LE across all listed turn signal positions and model years.
The 906 is classified under the ANSI standard system, which is the North American bulb designation framework used in the United States and Canada.
The 906 bulb follows the T10 form factor, a miniature wedge-base design that seats without a separate socket lock, relying instead on tension from the housing to hold the bulb in place.
The 906 operates at 12 volts and draws 8 watts, placing it in the low-wattage range typical of turn signal applications on smaller displacement motorcycles.
Both the front and rear turn signal positions on the PaulSmart 1000 LE share the same 906 bulb specification for the 2005-2006 model years, indicating a uniform fitment across all four signal positions.
Because all turn signal positions use the same bulb type, a single replacement bulb serves both front and rear housings without requiring separate part numbers for each position.
The T10 wedge base is a widely produced form factor, though not all T10 bulbs carry identical wattage ratings, making the 8W specification a relevant factor when selecting a replacement to avoid mismatched load output.
The 906 designation is specific to the ANSI classification system, and equivalent bulbs sold under international or European standards may carry different part numbers despite sharing the same physical and electrical characteristics.