Chrysler Cordoba Headlight Bulb Size

Chrysler Cordoba headlight bulbs utilize H6054, H4651, H4656, and H6024 bulb sizes for high and low beam applications, with specific size designations varying by production year. The replacement chart covers 1975 through 1983 model years and details corresponding bulb size specifications for each vehicle generation.

The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.

High Beam Headlight

Years	Bulb Size
1980-1983	H6054
1978-1979	H4651
1975-1977	H6024

Low Beam Headlight

Years	Bulb Size
1980-1983	H6054
1978-1979	H4656
1975-1977	H6024

Bulb Specifications

Description	Bulb Size
ANSI standard (US & Canada). 5x7-inch rectangular sealed beam unit. Not a replaceable bulb — the entire unit is replaced. 12V.	H6054
ANSI standard (US & Canada). 4x6-inch rectangular sealed beam unit. Not a replaceable bulb — the entire unit is replaced. 12V.	H4651
ANSI standard (US & Canada). 7-inch round sealed beam unit. Not a replaceable bulb — the entire unit is replaced. 12V.	H6024
ANSI standard (US & Canada). 4x6-inch rectangular sealed beam unit. Not a replaceable bulb — the entire unit is replaced. 12V.	H4656

Other Locations

Additional Notes

The Chrysler Cordoba uses three distinct sealed beam headlight types across its 1975-1983 model years: H6024, H4651, H4656, and H6054. All four are ANSI-standardized units rated at 12V and are sold and used throughout the United States and Canada.
All headlight units fitted to the Cordoba across this production span are sealed beam assemblies, meaning the lens, reflector, and filament are fused into a single unit. When a filament fails, the entire assembly requires replacement rather than an individual bulb.
The H6024 is a 7-inch round sealed beam unit. It served as both the high beam and low beam headlight on the 1975-1977 Cordoba, with a single part number covering both functions in those years.
For the 1978-1979 model years, the Cordoba transitioned to 4x6-inch rectangular sealed beam units. The high beam position used the H4651, while the low beam position used the H4656. These two part numbers are not interchangeable despite sharing the same physical form factor.
The H6054 is a 5x7-inch rectangular sealed beam unit. It was fitted to the 1980-1983 Cordoba in both the high beam and low beam positions, making it the only headlight type on those vehicles where a single part number covers both functions.
The physical size difference between the H4651/H4656 units (4x6 inches) and the H6054 units (5x7 inches) means these rectangular types are not physically interchangeable with one another, even though both generations used rectangular housings.
The round H6024 units from the 1975-1977 years are dimensionally incompatible with either rectangular type used in later model years, as the housing shape and mounting configuration differ fundamentally.
The H4651 (high beam) and H4656 (low beam) share the same 4x6-inch rectangular form but carry separate ANSI designations because they contain different internal filament configurations suited to their respective beam functions.