Chrysler Concorde License Plate Bulb Size

The Chrysler Concorde license plate light requires a 168 bulb size for proper illumination of the rear vehicle identification area. Available specifications for the lighting components span a continuous range from 1993 through 2004.

The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.

Bulb Size by Year Range

Years	Bulb Size
1993-2004	168

Bulb Specifications

Description	Bulb Size
ANSI standard (US & Canada). Miniature wedge bulb (T10). 12V, 4.9W.	168

Other Locations

Additional Notes

The Chrysler Concorde uses the 168 bulb size for its license plate position across all model years from 1993 to 2004.
The 168 bulb is a miniature wedge type, classified under the T10 form factor, which refers to a tubular bulb roughly 10mm in width with a wedge-shaped base that clips directly into a socket without requiring a separate metal base or pins.
The 168 operates at 12 volts with a power draw of 4.9 watts, placing it in the low-wattage range typical of exterior illumination bulbs used for non-lighting-critical positions such as license plates.
The 168 is an ANSI-standardized bulb, meaning its physical and electrical specifications are governed by a recognized industry standard applicable in both the United States and Canada.
Because the 168 follows an ANSI standard, it is produced by multiple manufacturers and is widely available as a direct replacement without modification to the socket or housing.
The T10 wedge base format used by the 168 is shared with several other bulb numbers in the same family, such as the 194 and 147, though those variants differ in wattage and should not be substituted without confirming electrical compatibility with the socket rating.