Chrysler 200 Fog Light Bulb Size

Chrysler 200 front fog light bulbs utilize an H11 size and PSX24W specification for optimal illumination. The replacement chart covers 2011 through 2017 model years with corresponding bulb size data.

The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.

Front Fog Light

Years	Bulb Type	Shop
2015-2017	H11 (With Halogen Capsule Headlamps)	Check Price
2013-2014	H11	Check Price
2011-2012	PSX24W	Check Price

Bulb Specifications

Description	Type	Shop
ECE standard (Europe & worldwide). Single-filament halogen bulb with PGJ19-2 base. Also approved in the US. 12V, 55W.	H11	Check Price
ANSI and ECE standard (US, Canada & worldwide). Single-filament halogen bulb with PG20-7 base. Recognized in both US and European regulations. 12V, 24W.	PSX24W	Check Price

Other Locations

Additional Notes

The H11 is a single-filament halogen bulb rated at 12V and 55W, fitted with a PGJ19-2 base. It carries ECE certification for European and worldwide markets and is also approved for use in the United States.
The PSX24W is a single-filament halogen bulb rated at 12V and 24W, fitted with a PG20-7 base. It meets both ANSI and ECE standards, giving it recognized status under US, Canadian, and European regulations.
The Chrysler 200 front fog light uses two distinct bulb types across its production run: the H11 for 2013-2017 and the PSX24W for 2011-2012. These two bulbs have different bases and wattage ratings, making them non-interchangeable.
For the 2015-2017 model years, the H11 fitment is conditional on the vehicle being equipped with halogen capsule headlamps. This indicates that not all examples from those years share the same fog light bulb specification.
The PSX24W draws 24W compared to the H11's 55W, reflecting a significant difference in power consumption between the two bulb types used across the 200's production span.
The PGJ19-2 base of the H11 and the PG20-7 base of the PSX24W are physically distinct connector types. A bulb with one base type cannot be seated in a socket designed for the other.