The CFMOTO UFORCE 800 high beam headlight uses an H7 bulb size while the low beam headlight requires H3 and H1 bulb sizes. The replacement chart covers vehicle production years from 2013 to 2018 with corresponding bulb size specifications.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The H7 bulb serves as the high beam headlight across all documented model years of the CFMOTO UFORCE 800, spanning 2013-2018. It is a single-filament halogen bulb rated at 12V and 55W, fitted with a PX26d base, and carries ECE approval for use in Europe and worldwide, with additional approval in the US and Japan.
The H1 and H3 bulbs share the same electrical rating as the H7, both operating at 12V and 55W with single-filament halogen construction and ECE approval. Despite these similarities, the three bulb types use entirely different base configurations and are not interchangeable with one another.
The low beam headlight position on the CFMOTO UFORCE 800 uses two distinct bulb types depending on the model year. The 2013-2015 model years use the H1 bulb, while the 2017-2018 model years use the H3 bulb.
The H1 bulb uses a P14.5s base, the H3 uses a PK22s base, and the H7 uses a PX26d base. Each base type has a unique pin and socket configuration, meaning a bulb from one category cannot be physically seated into a socket designed for another.
The 2016 model year low beam headlight uses the H1 bulb, placing it in the same specification group as the 2013-2015 years rather than the H3 group that follows in 2017-2018.
All three bulb types referenced in these specifications, H1, H3, and H7, conform to ECE regulations, which govern performance standards including light output, beam pattern, and operating tolerances for road use across participating regions.