American Motors Rambler headlight bulbs utilized H6024 and H5001 sizes for high beam applications, with H6024 and H5006 sizes for low beam configurations across this model line. The replacement chart documents bulb size specifications spanning 1958 through 1969 vehicle production years.
The year-by-year compatibility chart below provides a quick reference to verify the correct bulb size for your vehicle.
The American Motors Rambler headlight specifications reference three sealed beam unit types: H6024, H5001, and H5006. All three conform to ANSI standards recognized in both the United States and Canada and operate on a 12V electrical system.
Sealed beam units integrate the filament, reflector, and lens into a single housing. None of the three types listed accept a replaceable bulb; the entire unit is substituted when the light fails.
The H6024 is a 7-inch round sealed beam unit. It serves as both the high beam and low beam headlight on the 1969 Rambler, meaning a single unit type covers both functions on that model year.
The H5001 is a 4-inch square sealed beam unit designated for the high beam position on the 1958-1960 Rambler. Its square form factor distinguishes it physically from the round units used elsewhere in the same specification set.
The H5006 is a 5.75-inch round sealed beam unit assigned to the low beam position on the 1958-1960 Rambler. Its round housing differs in size from the H6024, and the two units are not interchangeable despite sharing a round profile.
The 1958-1960 Rambler employed a dual-unit headlight arrangement, pairing the H5001 for high beam with the H5006 for low beam. This separation of functions across two distinct unit types contrasts with the single H6024 unit used for both beams in 1969.
Because the H5001 is square and the H5006 is round, the two units occupy differently shaped housings and cannot substitute for one another regardless of voltage compatibility.
The H6024 and H5006 are both round sealed beam units operating at 12V, but their physical sizes differ at 7 inches and 5.75 inches respectively, making them incompatible as direct replacements for one another.